Location:Home  >  News  >  Problem
Do I need a chiller for all laser marking machines?
DATE:2021/1/21 15:56:37  Page view:3150

Does the laser marking machine need to be equipped with a chiller? The answer is: not necessarily.

Generally, the heat emitted by the laser is relatively large, and it is necessary to use a water-cooled machine, such as: an optical fiber machine, a carbon dioxide machine whose power is above 50W, and an ultraviolet laser marking machine all need to use a chiller to cool. However, water cooling has a drawback, that is, it is relatively large. On the contrary, the laser heat is not large, and the air-cooled device can be used, which not only condenses the volume of the equipment, but also reduces the power consumption of the equipment.

PS: Chiller is a kind of water cooling equipment. The principle of the chiller is to inject a certain amount of water into the internal water tank of the machine, cool the water through the refrigeration system, and then inject the cooling water into the equipment that needs to be cooled by the internal water pump, and the cooling water will take away the heat inside the machine. The high-temperature hot water is returned to the water tank to cool down again, and the cooling is exchanged in this way to achieve the effect of cooling the equipment. The corresponding control device can control the operation of the compressor refrigeration system according to the set parameter requirements, so as to ensure that the cooling water temperature of the equipment is always controlled within the specified range. To ensure the stable and safe operation of the equipment.

 

 


Online

Online

Tel

Manager Wen: 18902563402

QQ

QQ/p>

Wechat

Scan and follow
Fulan Public Account

Back
Top